2.0 Frame Assembly - Reprap Prusa Mendel Build Manual
©2012 NextDayReprap
Prusa Mendel Kit Build Manual V1.01 - 07/2012
Step 4
Take another 380 mm Threaded Rod and thread on the following parts from left to right. M8
Nut/M8 Washer/M8 Nut. Push this rod through the Frame Vertex from step 3 and attach an M8
washer and M8 nut to secure it. Your component should look like the photo below.
Step 5
Take your component from step one and thread it on to the component from step four. Add an
M8 washer and M8 nut to the end of the threaded rods. Your component should look like the
photo below.