2.0 Frame Assembly - Reprap Prusa Mendel Build Manual
©2012 NextDayReprap
Prusa Mendel Kit Build Manual V1.01 - 07/2012
Step 12
Take one 320 mm threaded rod and thread it with the following parts from left to right. M8
Washer/M8 Nut/M8 Nut/M8 Washer. Space them as in the photo below.
Step 11
Take two 450 mm threaded rods and thread them each with the following parts from left to
right. M8 Washer/M8 Nut/M8 Nut/M8 Washer. Space them as in the photo below (leave
approximately 100mm of threaded rod on each end).