1.0 Bill of Materials - Reprap Prusa Mendel Build Manual
Check Kit Contents & Familiarize yourself with the kit components
Below is a complete list of all the components within your kit, please check everything is present prior to
starting your build. It includes everything you need to build your printer and start printing, except for a
computer! If anything is missing please advise us straight away.
Tools & Ancillaries
0.1
Build Manual
0.2
Operation Manual
0.3
Software CD/Flash Drive
0.4
33M 20mm Kapton Tape
0.5
Cable Ties
0.11
.25 Kg White 3mm ABS Filament
0.12
Silver Tape
0.13
Cable Tidy
1.0 Electronics
1.1
Fully assembled RAMPS 1.4 Wired & Soldered with Hot end power & Thermistor attached.
1.2
Ramps Power Cables
1.3
3x Mechanical Endstops with Completed Wiring
©2012 NextDayReprap
Prusa Mendel Kit Build Manual V1.01 - 07/2012