10.1
Connecting Hardware & Driver Installation
10.1.2
Ardunio Driver - Windows XP Installation
10.1.2.1
Setting Port Speed - Windows XP
Installation
We now need to set the correct port speed for the new serial port we have just created by installing
the Arduino driver in the previous section.
Step 1
Navigate to the “Windows Control Panel” and select “system” and select the “hardware “ tab.
Step 2
Navigate to “Ports (COM & LPT)” and expand it by selecting the “+” symbol, now select “Arduino
MEGA 2560 R3” and right click and select “Properties” .
10.0 Computer Setup - Reprap Prusa Mendel Build Manual
©2012 NextDayReprap
Prusa Mendel Kit Build Manual V1.01 - 07/2012