3. X-axis & Extruder assembly
Original Prusa MINI+ kit assembly
55
STEP 15
Assembling the X-carriage
Insert the M3n nut into the MINI-X-carriage from the side.
Use the screw pulling technique.
Locate the hole on the opposite side of the part and insert the M3nS nut all the way
down into the hole.
STEP 16
Mounting the X-carriage
Align both bearings with the markings facing you.
Place the X-axis with the screw heads in the MINI-Z-carriage facing you.
Take the MINI-X-carriage and place it above the bearings. Make sure the longest
side of the part is on the left side.
Align the cutouts in the part against the bearings.
Push the MINI-X-carriage onto the bearings
Ensure the bearings are properly seated and they are centered in the X-carriage.
Summary of Contents for Original Prusa MINI
