5. LCD assembly & Electronics
94
Original Prusa MINI+ kit assembly
STEP 13
Filament sensor assembling (optional)
Secure the IR sensor with the M2x8 screw.
Insert the steel ball to the hole in the box.
Place the MINI-fsenzor-lever to the box.
Secure it with the M3x12 screw.
Do not tighten too much.
The lever must move
freely.
Insert the magnet in the MINI-fsenzor-lever.
Insert the magnet in the MINI-fsenzor-box.
The magnets must repel each other.
Make sure the
MINI-fsenzor-lever can move freely
and
the magnets repel each
other
.
STEP 14
Filament sensor assembling (optional)
Wrap the textile sleeve around the filament sensor cable and slide it into the box as
far as possible.
Place the MINI-fsenzor-cover to the filament sensor assembly.
Secure it with two M3x12 screws.
Summary of Contents for Original Prusa MINI
