5. LCD assembly & Electronics
98
Original Prusa MINI+ kit assembly
STEP 21
Covering the electronics
Before covering the electronics, make sure the square nut is correctly positioned in
the printed part.
The nut must not fall out!
This can cause fatal damage to the
electronics.
Insert the "teeth" of the cover into the grooves of the MINI-Z-bottom.
Place the second cover on the top and arrange the cables:
Extruder bundle
, ensure the textile sleeve is partially in. Also, it must be tilted
away from the printer.
Heatbed bundle
, ensure the textile sleeve is partially inside the box.
Filament sensor cable
(optional), ensure that the textile sleeve wrapped around
the cables is partially inside the box.
Now, tighten the second cover. Check that no cable is pinched.
STEP 22
Gluing the silver label
WARNING:
This step is important,
don't skip it! The silver label
includes the printer's serial number
and other important information. Its
presence is necessary for any
warranty claim.
In case the label is
already on the frame, please skip
this step.
Rotate the printer, so that the side
with the power button and USB
faces towards you.
Carefully peel off the protective
layer and glue the label on the side
of the extrusion. Ensure there is no
air trapped below the label. The
orientation of the sticker doesn't
matter.
Summary of Contents for Original Prusa MINI
