7
Safety instructions
Please be very cautious during any interaction with the printer. This printer is an electrical
device with moving parts and UV light emission.
The device is for indoor use only. Do not expose the printer to rain or snow. Always keep the
1.
printer in a dry environment at a minimum distance of 30 cm from other objects. Make sure
none of the vents/fan outlets are blocked.
Always place the printer on a stable place, where it cannot fall or tip over.
2.
The printer supply is household power outlet 230 VAC, 50 Hz or 110 VAC / 60 Hz. Never
3.
connect the printer to a different power supply; it may cause malfunction or damage to the
printer.
Place the power cord so you cannot stumble over it, step on it, or otherwise expose it to any
4.
potential damage. Also make sure that the power cord is not mechanically or otherwise
damaged. If so, stop using the damaged power cord immediately and replace it.
When you disconnect the power cord from the socket, pull the plug rather than the cord to
5.
reduce the risk of damage to the plug or to the AC outlet.
Never disassemble the printer’s power supply; it does not contain any parts that could be
6.
repaired by an unskilled worker. All repairs must be performed by a qualified technician.
Do not reach inside the printer while it is still in operation. An injury may be caused by its
7.
moving parts or electrical current.
Prevent children from unsupervised access to the printer even when the printer is not
8.
printing.
Do not leave the printer unattended while it's still on!
9.
Do not print with a disassembled printer or with a printer that has an open lid or any parts
10.
missing.
Never look directly into the UV light.
11.
Keep in mind that resins are liquids which produce odors. Make sure the printer is set in a
12.
ventilated place. Use the bundled plastic tray to shield the machine from drops of liquid.
Some people may be allergic to resins - either to skin contact or even the vapors. If you
13.
experience any kind of discomfort when working with resins (like itching), stop immediately
and consult your doctor