®
4826 Sterling Drive, Boulder, CO 80301 . PH: 1 (800) PSAUDIO . www.psaudio.com
15-067-21-1
Rev A
©
2018 PS Audio Inc. All rights reserved.
Owner’s Reference
Sprout100
Sprout100 has four rear panel inputs you can connect your
sources to: two digital, one analog and one phono for your
vinyl. It can also connect wirelessly via Bluetooth.
Sprout100 can connect to three digital devices, two
from the rear panel connections and one wirelessly via
Bluetooth from your phone, computer or tablet.
USB connects Sprout100 to your computer. Once
connected, Sprout100 will become the audio output
of your computer, playing from programs like TIDAL or
iTunes. Using a standard USB 2.0 certified cable, connect
Sprout100 to your computer’s USB port. Then be sure to
select the digital input on the front panel.
If you are running a Mac computer or a Windows 10 PC
the driver for Sprout100 is built in. If you are instead
on a Windows 8.1 or earlier computer, you will need to
download and install the USB driver.
To download the USB driver go to PS Audio’s website:
www.psaudio.com. Go to Support->Downloads and
download the USB driver.
It will be necessary to unzip the file and install it on your
computer. This will connect your Windows computer
to Sprout100. You must then select “PS Audio USB 2.0
Audio Out” (on a Mac) as your output device or, “PS Audio
Sprout100” on Windows.
Connect the
inputs first
Digital
Sources
USB input
12
Operating Guide
Summary of Contents for Sprout100
Page 28: ......