Page 10
202-890-0913
PMA8000G Pilot Guide R3
recognized by the PMA8000G, you may simply need to re-pair.
Reset Bluetooth devices
If the Bluetooth stops responding to paired devices, it may be because
of corrupted device data. Simply reset the Bluetooth system as fol-
lows:
1. Power off audio panel
2. Put the pilot’s headset on
3. Hold down NAV1 and NAV2 buttons at the same time
4. Turn ON the audio panel, and continue to hold down the two
buttons for at least 5 seconds or there is a "ding" sound in head-
set, if you do not hear this chime start over.
5. Audio panel re-initiation is complete
6. Remove PMA8000G device from your smart phone
7. Search for Bluetooth devices from your smart phone
8. Select PMA8000G
9. If password is required try 0000
10. Once paired stream music and place phone call
Pairing separate music and telephone devices
It is possible to use a different music source (iPad, iPod with Blue-
tooth adapter, Bluetooth enabled laptop, etc) and telephone. However,
the music source must be paired second, after the telephone, if the
telephone also has music streaming capability. Otherwise, the
Smartphone will also take over the music streaming.
Split Mode
The Split mode puts the pilot on COM 1, while the copilot can use
COM 2 independently. To enter the split mode, press both the XMT 1
and XMT 2 buttons at the same time. To exit, press the desired COM
1 or COM 2 XMT button.
When you activate the Split mode, the intercom is inhibited to avoid
confusion with multiple conversations. The ICS indicator goes off
when Split mode is activated. To reactivate the intercom, press the
Mute button, which places the intercom in CREW mode.
Note: Split Mode does not turn off selected navaid audio to pilot.
However, the copilot will only hear the selected com receiver and
unswitched inputs.
Alternate Intercom mode
The Alternate Intercom mode
allows the passenger s and cr ew to
converse, in ALL intercom mode, without distracting the crew from
