background image

6

13. GOOD SAFETY HABITS

DEVELOP AND PRACTICE A PLAN OF ESCAPE:

13.1         Make a floor plan indicating all doors and windows and at least two (2) escape routes from each room.

Second story windows may need a rope or escape ladder.

13.2         Have a family meeting and discuss your plan, showing everyone what to do in case of fire.
13.3         Determine a place outside your home where you can all meet if a fire occurs.
13.4         Familiarise everyone with the sound of the alarm and train them to leave home when they hear it.
13.5         Practice a fire drill at least every six months. Practice allows you to test your plan before an emergency.

You may not be able to reach your children. It is important they know what to do.

14. WHAT TO DO WHEN THE ALARM SOUNDS

14.1        Leave immediately by your escape plan. Every second counts, so do not waste time getting dressed or

picking up valuables.

14.2        In leaving, do not open any inside door without first feeling the surface. If hot, or if you see smoke seeping

through gaps, do not open that door! Instead use your alternate exit. If the inside of the door is cool, place
your shoulder against it, open slightly and be ready to slam it shut if heat and smoke rush in.

14.3 

Stay close to the floor if the air is smoky. Breath shallowly through a wet cloth, if  possible.

14.4 

Once outside, go to your selected meeting place and make sure everyone is there.

14.5 

Call the Fire Brigade from your neighbour’s home - not from yours !

14.6 

Do not return to your home until the fire officials say that it is safe to do so.

There are situations where alarms may not be effective to protect against fire.
For instance:

a) smoking in bed
b) leaving children home alone
c) cleaning with flammable liquids, such as petrol

Further information on fire safety can be obtained from your local Fire Brigade.

15. BCA REQUIRED PROTECTION

Your local council can provide you with information regarding the legal requirement of fire protection equipment

for your home in accordance to the Building Codes of Australia (BCA). Wherever possible, ensure that you aim for
maximum protection by considering the use of additional smoke or heat alarms for increased coverage.

16. SERVICE & WARRANTY

If after reviewing this manual if you find that your heat alarm is defective in any way, do not tamper with the unit.

Return it to : PSA Products Pty Ltd   17 Millicent Street, Burwood, Victoria. 3125.

16.1 

PSA Products Pty Ltd warrants that for two years from the date of purchase of the Heat Alarm, it will re-
pair or replace the Heat Alarm (at the option of  PSA Products Pty Ltd) due to any manufacturing defect,
at the cost of PSA Products Pty Ltd (excluding any labour costs relating to removal or re-installation of
product, and transport costs). This warranty does not extend to the battery.

16.2        This warranty shall not apply to the Heat Alarm if it has been damaged, modified, abused altered after the

date of purchase, or if it fails to operate due to improper use.

16.3        To the extent permitted by law, the liability of PSA Products Pty Ltd arising from the sale of this Heat

Alarm or under the terms of this limited warranty shall not in any case exceed the cost of replacement of
Heat Alarm and subject to this clause.  In no case shall PSA Products Pty Ltd be liable for consequential
loss or damages resulting from the failure of the Smoke Alarm or for breach of this, or; Any other war-
ranty, express or implied, loss or damage caused by failure to abide by the instructions supplied in this
manual.

16.4        To the extent permitted by law, PSA Products Pty Ltd, makes no warranty, expressed or implied, written or

oral, including that of merchantability or fitness  for any particular purpose, with respect to the battery.

16.5        This warranty is in addition to and does not exclude the rights of consumers under the Australian Trade

Practices Act 1974, or any other law which may not be excluded.

16.6        To ensure quick and efficient warranty on this product; please register the details on our website.

www.psaproducts.com.au

  There are a few important reasons to register your product:

1. It will ensure your investment is protected in case it is damaged or broken and we can effectively

carry out any warranty claims.

2. Registration will also allow us to contact you in an unlikely event of product safety notification

required under Consumer Product Safety Act.

3. Registration will also help us improve our product design to meet your needs.

For your convenience, register easily on-line on www.psaproducts.com.au
If you need any assistance, please contact us.

DEAR ELECTRICIAN:
PLEASE LEAVE THIS MANUAL FOR THE OWNER.
THANK YOU FOR CHOOSING THIS HEAT ALARM.

1004-7201-01(HA240)_V2:_  2010.9.2  9:20 AM  Page 7

Summary of Contents for Lifesaver HA240









Reviews: