R44-2018
45
S
YMBOLOGY
S
ELECTION
Symbologies
Symbology selection (bar code type) determines which symbologies the scanner will
decode. Once you have identified the symbologies you wish to enable, turn to the
following pages, enable those symbologies and set the data format options (e.g. check
digit, start/stop characters) required by your host system for each symbology type.
You must enable the symbology format options settings that are compatible with
your host system.
The factory settings for each interface were chosen to meet the standard industry
requirements and in most cases you will not need to change the symbology format
settings. If you are unsure of your system requirements, test the scanner using the
factory settings before making any changes.