37
3.4
LCD USER INTERFACE – OPERATION AND CONFIGURATION
Manual mode main page
Thermostat mode main page
=
Indicates that the furnace status is on manual mode
= Indicates that the furnace status is on thermostat mode. The green waves indicate that
the thermostat is on demand. The waves will disappear once the desired temperature is reached.
=
Indicates the flue temperature
,
,
,
,
= Indicates the BTU setting. Starting from the smallest flame to the
biggest flame, the respective BTUs are : 17,000 – 60,000 – 80,000 – 100,000 or 120,000. Pressing on the
desired BTU setting (flame) will change the color of the flame to green to show its activation.
,
= Indicates whether the furnace is on or off. If the flame is shown in the middle of the
button, the furnace is on. If the flame is not shown in the middle of the button, the furnace is off.
= This button leads to the menu screen
=
This button is used to fill up the auger. Pressing once will active the auger for 1 minute.
=
The hourglass indicates how long the pilot will be on before shutting down the unit. The setting
chosen by the user appears under the hourglass.
Summary of Contents for CADDY ALTERNA
Page 11: ...11 A B C Step 2 Remove the screws around the blower assembly...
Page 49: ...49 6 GENERAL WIRING DIAGRAM...
Page 50: ...50...
Page 51: ...51...
