Page 5
February 2015
_________________________________________________________________________________________________
9900 Twin Lakes Parkway
Charlotte, NC 28269
704-596-5617
Fax 704-596-9081
www.PSICONTROLSOLUTIONS.com
P
SI Control Solutions’ Generator Tap Boxes are available with the following offerings.
400-4000A
100-240VAC Single Phase
208-600VAC Three Phase
Fully-Rated Neutral
NEMA 3R or 316SS 3R Enclosure
Male or Female Cam-Lok Receptacles
Mechanical Lugs or Pre-drilled Busbar for Compression Lugs
Phase Rotation Protection
2.0 RECEIVING, HANDLING, and STORAGE
2.1 RECEIVING
After receiving the Generator Tap Box, unpack the unit and check for any damage that
may have occurred during shipment.
2.2 HANDLING
The following guidelines are provided to help avoid personal injury and equipment
damage during handling.
A.
Follow the manufacturer’s handling instructions for the specific equipment.
B. Handle the Generator Tap Box with care, to avoid damage to components and to
the enclosure or its finish.
C. Ensure the moving means is capable of handling the entire weight of the
Generator Tap Box.
NOTE:
Weights are not distributed evenly.
2.3 STORAGE
If the Generator Tap Box is to be stored for any length of time prior to installation,
restore the packaging for protection during that period. Where conditions permit, leave
the packing intact until the Generator Tap Box is at its final installation position. When
packing is removed, cover the top and openings of the equipment during the
construction period to protect them against dust and debris
