background image

Chapter 2: Basic Checkout

Setting Up An 802.11b/g Radio–Summit Client Utility

Ikôn Rugged PDA (Windows Mobile 6.1) User Manual

17

Where applicable, a link to an associated screen is provided.Tap on the link to display 

the screen and complete your task.

To go back to the 

Getting Started

 menu, tap on the 

Back

 softkey in the taskbar at the 

bottom of the screen.

2.6

Setting Up An 802.11b/g Radio–Summit Client Utility

This section describes the steps required to set up the 802.11b/g Summit Radio using the 

Summit Client Utility

 (SCU). 

To review details about the options within the SCU tabs – 

Main

Profile

Status

Diags

 and 

Global

 – review Appendix A: “Summit Client Utility (SCU)”.

2.6.1

Assigning The IP Address

Before launching the SCU, you need to configure the method by which the IP address will 
be obtained.

Tap on 

Start>Settings>Connections tab>Wireless Manager

 icon.

In  the 

Wireless Manager

 dialog box, tap on the 

Settings

 button.

Tap on the 

Network Adapters

 tab, and then tap on -

Summit WLAN Adapter

 in the 

list.

The 

Summit WLAN Adapter

 dialog box is displayed. You have two options:

Tap on 

Use server-assigned IP address

 to have an address assigned automatically, 

or

If you want to use a particular IP address, tap on 

Use specific IP address

, and type the 

preferred address.
If you tap on the 

Name Servers

 tab, you can statically configure the DNS servers; how-

ever, if you use DHCP for IP address assignment, DNS is usually supplied by the same 
server that supplied the IP addresses.

2.6.2

Using The SCU To Connect To The WLAN

This section provides a quick set of steps to create a profile. Detailed information about each 
of the SCU tabs – 

Main, Profile, Status, Diags

 and 

Global 

– is provided under Appendix A: 

“Summit Client Utility (SCU)”.
To launch the SCU so that your PDA can connect to a wireless LAN:

Summary of Contents for Ikon 7505-BT























































































































































































































































































































































































































Reviews: