Appendix C: Teklogix Imagers Applet
Selecting A Camera
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
C
-5
The following screen is displayed:
Figure C.1 Imaging Tab
This window lists all the presets, both predefined and custom. Presets are identified
as follows:
•
Predefined presets are marked as
read-only
.
•
Custom presets are marked as
read and write
.
•
One preset – either predefined or custom – is marked as
active
.
C.3.2
Selecting A Camera
If your Ikôn has more than one built-in camera, one camera must be selected for configura-
tion. To select a camera:
•
Tap on the
Camera Presets
dropdown menu to view the camera options.
•
Choose a
camera
– either
Front Imager
, the imager located at the top of the unit, or
Bottom Colour Camera
, the camera located at back of the Ikôn.
C.3.3
Setting The Active Preset
An active preset has an
A
to the right; in Figure C.1 on page C-5, the active preset is
Low
light near
. To set an active preset:
•
Highlight the preset, and tap on the
Activate
button.
Important: Currently, only the ‘Front Imager’ can be used to read bar codes. The
‘Bottom Colour Camera’ is limited to taking photos.