Appendix D: Bar Codes Settings
EAN 8
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
D
-39
Addendum
An addendum is a separate bar code, supplementary to the main bar code. This parameter
provides three options: Disabled, Optional and Required. Depending on the value chosen for
this parameter, an addendum is recognized or ignored.
•
Double-tap on
Addendum
to display a dialog box listing your options.
•
Highlight an item, and tap on
OK
.
When “Addendum” is set to
Disabled
, the scanner does not recognize an addendum. If this
parameter is set to
Optional
, the scanner searches for an addendum and if one exists,
appends it to the main bar code. When the parameter is set to
Required
, the scanner does not
accept the main bar code without an addendum.
Add/Remove Data
Refer to “Add/Remove Data” on page D-9 for details.
D.4.5
EAN 8
Enabled
Set this parameter to
on
to enable “EAN 8”.
Addendum
Refer to “Addendum” on page D-26.
Add/Remove Data
Refer to “Add/Remove Data” on page D-9 for details.
D.4.6
UPC A
Enabled
Set this parameter to
on
to enable “UPC A”.
Addendum
Refer to “Addendum” on page D-26.
Add/Remove Data
Refer to “Add/Remove Data” on page D-9 for details.
Note: Setting “Addendum” to ‘Optional’ reduces performance. It should only be chosen if
at least some of the bar codes being read have addendums.
