background image

Chapter 3: Get To Know The Ikôn

Locking The Keyboard

40

Ikôn Rugged PDA (Windows Mobile 6.1) User Manual

3.3.2

Locking The Keyboard

You can lock the keyboard to prevent accidental key presses. To set up the locking/unlock-
ing key sequence:

Tap on 

Start>Settings>Buttons

. Tap on the right arrow icon 

in the bottom-right 

corner of the screen to scroll to the 

Lock Sequence

 tab.

Refer to “Lock Sequence” on page 132 for details about setting up this function.

3.3.3

Modifier Keys

The [SHIFT], [CTRL], [ALT], [BLUE] and [ORANGE] keys are modifier keys. Pressing a 
modifier key changes the function of the next key pressed. For example, on an 47-key key-
board, a left bracket is printed in orange print above the [U] key. Pressing the [ORANGE] 
key, a modifier key, followed by the [U] key displays a left bracket rather than the letter 

U

.

The [SHIFT], [CTRL] and [ALT] keys operate much like a desktop keyboard except that 
they are not chorded (two keys held down simultaneously). The modifier key must be 
pressed first followed by the key whose function you want modified.

3.3.3.1 Activating Modifier Keys & The Shift-State Indicator

When a modifier key is pressed, it is represented in the shift-state indicator icon in the 
softkey bar at the bottom of the screen, making it easier to determine whether or not a modi-
fier key is active. If the shift-state indicator icon is not visible (you can only see the soft 
keyboard icon), you may need to take a few steps to display the shift-state indicator icon.

Tap on 

Start>Settings

 followed by the 

Buttons

 icon.

Tap on the 

One Shots

 tab at the bottom of the screen.

Tap in the check box next to 

Show modifier key state

 to display the shift-state 

indicator icon.

Note: Keep in mind that the [ALT] and [CTRL] keys are only available on 

numeric

 key-

pads that are 

not

 equipped with phone keys. You can, however, access the [CTRL] 

key using the onscreen, soft keyboard.

Summary of Contents for Ikon 7505-BT























































































































































































































































































































































































































Reviews: