D-8
Psion Teklogix NEO Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Removing a Custom Preset
The parameter list is displayed; the new value for the changed parameter is shown.
•
Tap on
OK
to exit to the preset list and save the changes.
D.3.7
Removing a Custom Preset
•
Highlight the custom preset you want to delete, and tap on the
Remove
button.
A window is displayed warning you that you are about to remove a preset.
•
Tap on
Yes
to remove the preset or
No
to cancel the operation.
D.4
Configuring the Bar Code Decoding Camera Presets
To configure the bar code decoding camera presets:
•
Tap on
Start>Settings>Control Panel>Teklogix Imagers
.
•
Tap on the
Barcoding
tab.
Figure D.2 Bar Code Presets
This window lists all the presets, both predefined and the custom. Presets are identified
as follows:
•
Predefined presets are marked as read-only. For a description, review “Predefined Pre-
•
Predefined presets are marked as ‘R’
read-only
.
