Appendix D: Teklogix Imagers Applet
MSI Plessey
Psion Teklogix NEO Hand-Held Computer User Manual
D-27
Check Char Strip
If you enable this parameter, a check character is stripped from the decoded bar code data.
Concatenation
“Codabar” supports symbol concatenation. When
Concatenation
is set to
on
, Codabar uses a
‘D’ stop character to indicate that data from that symbol should be concatenated with data
from the adjacent symbol with a ‘D’ start character.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
2 to 60.
D.5.12 MSI Plessey
Enabled
Set this parameter to
on
to enable MSI.
Enable Plessey
Set this parameter to on to enable Plessey.
Check Char
When this parameter is set to
on
, the integrity of a “MSI Plessey” symbol is checked to
ensure that it complies with specified algorithms.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
4 to 48.
Plessey Minimum and Plessey Maximum Length
These parameters apply to Plessey bar codes.The length of a code refers to the number of
characters (i.e., human readable characters), including check digit(s). Double-tapping on
these parameters displays a screen in which you can set the minimum and maximum allow-
able code lengths –
4 to 48.
