Psion Teklogix NEO Hand-Held Computer User Manual
135
Chapter 5: Configuration
Teklogix Scanner Settings
Scanner Menu
5.14
Teklogix Scanner Settings
The
Teklogix Scanners
icon in the
Control Panel
provides dialog boxes in which you can
tailor bar code options and choose the bar codes your scanner will recognize. The parame-
ters are preset with the default settings of the decoded scanner installed in the unit.
Not all
options apply to all scanners
.
For a listing of available scanners and their specifications, please refer to Chapter 7:
“Specifications”.
5.14.1 Bar Codes Tab
5.14.1.1 Scanner Menu
The drop-down menu to the right of the
Scanner:
option allows you to choose from one of
the following scanner types used with your hand-held:
Decoded
(internal) and
Decoded
(ISCP). If an HHP 5000 imager is installed in your unit, refer to Appendix D: “Teklogix
Imagers Applet” for details about setting up your imager.
The symbologies listed change to reflect the scanner you choose and the bar codes
it supports.
Note: Refer to Appendix C: “Bar Code Settings” for details about the symbols for each
scanner type.
