Chapter 6: Peripheral Devices & Accessories
Basic Scanner Operations
Psion Teklogix NEO Hand-Held Computer User Manual
165
unit can be configured using the
Scanner Settings
dialog box in the
Control Panel
(see “Tek-
logix Scanner Settings” on page 135 and Appendix C, “Bar Code Settings,”) and the
Manage Triggers
application (see page 98).
If a 2D imager is installed in your unit, the imager can be configured using the
Teklogix
Imager
applet. For details, refer to “Imager Demo Applet” on page 134 and Appendix D:
6.9.1
Basic Scanner Operations
•
Turn the hand-held on. Wait until the unit has booted up completely.
•
Aim at the bar code and press the scan key or the trigger. A scan beam and a warning
indicator appear until a successful decode is achieved or six seconds have elapsed.
6.9.2
Scanning Techniques
•
NEO’s unique ergonomic design allows you to hold the hand-held at a comfortable
angle while scanning.
•
Ensure that the scanner beam is not perpendicular to the bar code. Light reflected
directly back into the scanner’s exit window may prevent a successful decode.
•
Scan the entire bar code. If you are using a 1D laser scanner, make certain that the scan
beam crosses every bar and space on the bar code, including the margins on either end
of the symbol.
•
When using imaging scanners, do not move the scanner while decoding the bar code.
Movement blurs the image.
•
Hold the scanner farther away for larger bar codes.
•
Hold the scanner closer for bar codes with bars that are close together.
A bar code icon appears on the screen during a scan. While the scanner beam is active, the
onscreen message states: SCANNING. If you want to turn off the onscreen message, disable
Scan Indication
in the
Options
tab of the
Scanner Settings
menu in the
Control Panel
.
When the scan is successful, the bar code data is displayed on the screen until the scan
button (or pistol trigger) is released, but only if
Scan Result
is turned on in the
Options
tab
of the
Scanner Settings
menu in the
Control Panel
.
Important: It is critical that you review the “NEO Hand-Held Computer Regulatory &
Warranty Guide, PN 8000175, before proceeding.