C
-32
Psion Teklogix NEO Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Composite
cannot be scanned by omnidirectional scanners. Each of these options can be turned
on
or
off
depending on the scanner installed in your hand-held.
Length Restriction
Refer to “Length Restriction” on page C-7 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-8 for details.
C.2.19 Composite
A composite symbol includes multi-row 2D components making it compatible with linear
and area CCD scanners along with linear and rastering laser scanners.
The options available for this parameter represent multi-level components of a
composite symbol.
Enable CC-C and Enable CC-AB
To activate these components, set these parameters to
on
.
Linear Transmission Only
When
Linear Transmission Only
is enabled, only the linear code portion of the composite
bar code is transmitted when scanned.
UPC-EAN Composite Message
This option allows you to choose how UPC-EAN shared bar codes are transmitted:
Always
Linked
,
Never Linked
or
Auto-discriminate
.
C.2.20 TLC-39
Enable
Setting this parameter to
on
enables
TLC-39
scanning capability.
Important: To successfully read this type of bar code, the two types of symbologies
included in a composite bar code must be enabled. In addition, “Center Bar
Code Only” must be disabled.
