manualshive.com logo in svg

Psion Teklogix WORKABOUT PRO 7527C-G2, User Manual

The Psion Teklogix WORKABOUT PRO 7527C-G2 is a rugged handheld device designed for industrial use. For detailed instructions on how to use its features, download the free user manual from 88.208.23.73:8080. Stay informed and maximize the potential of your device with the helpful manual.

Share
Download
background image

Contents

ii

WORKABOUT PRO

3 

with Windows Mobile 6.1 User Manual

Chapter 3:  Get To Know WORKABOUT PRO

3

3.1

Features of the WORKABOUT PRO

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

3.2

The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.2.1

Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.2.2

Removing the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.2.3

Battery Swap Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.2.4

Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.3

Switching the Hand-Held On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

3.4

The Keyboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.4.1

The WORKABOUT PRO

3

 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.4.2

Modifier Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.4.3

The Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.4.4

Alpha Keyboard –– Accessing Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

3.4.5

QWERTY Keyboard –– Accessing Numeric Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

3.4.6

Numeric Keyboard –– Accessing Alpha Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

3.4.7

The Keypad Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

3.5

The Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5.1

Adjusting the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

3.5.2

Aligning (Calibrating) the Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

3.5.3

Screen Orientation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

3.6

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.6.1

The LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.7

Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.7.1

Adjusting Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

3.8

Monitoring the Battery and Maximizing Run Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3.8.1

Storing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

3.9

Uploading Data in a Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

3.10

Bluetooth

 Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

3.10.1 Pairing a 

Bluetooth

 Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

3.11 Inserting the SD/MMC Card and SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.11.1 Inserting and Removing the Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.12 General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

3.12.1 Caring for the Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.12.2 Cleaning the WORKABOUT PRO

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Chapter 4:  Working With Windows Mobile 6.1

4.1

Navigating in Windows Mobile 6.1 and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.1.1

Navigating Using a Touchscreen and Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Summary of Contents for WORKABOUT PRO 7527C-G2































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WORKABOUT PRO 7527C-G2

Hand Held Products Dolphin 9500 Software Upgrade Instructions preview
Dolphin 9500
Brand: Hand Held Products Pages: 4
Sony PEG-UX50 - Clie Handheld Brochure preview
PEG-UX50 - Clie Handheld
Brand: Sony Pages: 1
Sony PEG-UX00 User Manual preview
PEG-UX00
Brand: Sony Pages: 52
Sony PSP-S360G Instruction Manual preview
PSP-S360G
Brand: Sony Pages: 76
HP Tablet PC Series Startup Manual preview
Tablet PC Series
Brand: HP Pages: 114
NTT docomo arrows Fit M02 Instruction Manual preview
arrows Fit M02
Brand: NTT docomo Pages: 192
NTT docomo L-06D JOJO Instruction Manual preview
L-06D JOJO
Brand: NTT docomo Pages: 288
Docomo F-02C Instruction Manual preview
F-02C
Brand: Docomo Pages: 8
Docomo xperia XZS SO-03J Instruction Manual preview
xperia XZS SO-03J
Brand: Docomo Pages: 261
Docomo F-05C Instruction Manual preview
F-05C
Brand: Docomo Pages: 133
Docomo arrows tab lte F-01D Instruction Manual preview
arrows tab lte F-01D
Brand: Docomo Pages: 124
Docomo F-11C Instruction Manual preview
F-11C
Brand: Docomo Pages: 138
Docomo F-04H Instruction Manual preview
F-04H
Brand: Docomo Pages: 196
Docomo arrowsbe F-05J Instruction Manual preview
arrowsbe F-05J
Brand: Docomo Pages: 218
Docomo Galaxy note edge sc-01g Instruction Manual preview
Galaxy note edge sc-01g
Brand: Docomo Pages: 615

Brands by name

Popular brands

Load more brands