SG20 Series Soccer Goal
1
Table of Contents
Section
Page No.
Introduction/Liability
Disclaimer
1
Parts Checklist
2
Goal Assembly
3-9
Maintenance
10
Introduction/Liability Disclaimers
Thank you for your purchase of the SG20 Series Soccer Goal. To ensure that our equipment will
provide years of use to you, we are including this installation, operation, and maintenance guide.
This guide will provide information on the proper assembly and installation methods, operating
procedures, and preventative maintenance of your soccer goal.
Please note that a Bill of Materials is being included with this guide. Please check that all of the
parts called out on the Bill of Materials are present prior to beginning assembly. Please do not
substitute for factory parts. Please contact the PSS or Gared Sports customer service department and
allow them to determine if substitute parts are acceptable.
It is recommended that an individual who has been properly trained perform assembly and set up
of the Soccer Goal. No one under the age of 18 should attempt assembly or set up of the unit, unless
properly supervised.
To prevent normal wear and tear from shortening the life of the unit, preventative maintenance
inspections and repairs should be performed at least once per year. If the units are subject to high or
unusual usage, inspections should be scheduled to occur more frequently. If items are found to be
nonconforming, replacements can be ordered from Gared Sports or one of our authorized dealers.
When contacting PSS or Gared Sports, please have information regarding the dealer/installer who
sold the unit, the name of the project, and any applicable warranty information.
Before proceeding with assembly, read all instructions and assembly proceedures. Make sure all parts
have been received and are not damaged.
