Digital Conference System (D-3002)
Used for confirming your settings.
④
LCD Screen Show the system status of the control unit and system menus.
⑤
VOLUME
Select one audio type to adjust its volume.
⑥
MODE
Switch the speech mode recurrently. Keep pressing it until it turn
to the mode you need, and the corresponding LED indicator will
be on. (Refer to 4.2.2 Mode Value Setting for detailed
description.)
⑦
ACTIVE
MICRO’S
Determine the capacity of live delegate units, switch recurrently.
Keep pressing it until it turn to the number you need, and the
corresponding LED indicator will be on.
2.2 D-3002 Rear Panel
Figure 2-2 Rear Panel of D-3002
No.
Name
Description
①
DELEGATE
5 RJ45 ports in total (cascade connection), to connect with
discussion units, use crossover twisted pairs only.
②
Audio input/
outputs
AUDIO IN: line audio input port, XLR female connector,
connects with audio source device.
AUDIO OUT: audio output ports, XLR male connector, 4
in total, mixed line audio input (from AUDIO IN) and
microphone input audio of active discussion unit, can
connect with amplifiers.
③
SDI INPUTS
SDI input ports, 4 in total, connects with cameras, to track
the person who is speaking in a conference.
④
SDI
OUTPUTS
SDI output ports, 2 in total. Usually 1 port is used for local
monitoring.
⑤
RS485
RS485 IN: connects with camera keyboard (to control the
cameras)
3