4K HDBaseT 6x6 Matrix Switcher
PTN Electronics Limited 7 www.PTN-electronics.com
4. System Operations
4.1 Front Panel Button Control
The operation examples are showed in
2.1 Front Panel.
Here we make a brief
introduction to the system operations.
4.1.1 Switching I/O connection
1) To convert one input to an output:
Operation:
―input‖+――ENTER‖
Example: input 1 to output 2
Note: In default status, the 6 IR OUT sockets correspond with 6 HDMI INPUTS. When
you convert an HDMI input to an output, the corresponding IR OUT will be switched
synchronously.
2) To convert an input to several outputs:
Operation:
―input‖ + ―output‖ + ―output‖ +… + ―ENTER‖
Example: Switch input 2 to output 2, 4
3) To convert an input to all outputs:
Operation:
―input‖ + ―ALL‖ + ―ENTER‖
Example: Convert input 1 to all outputs
Note:
Indicators of the pressed buttons will blink green for three times if the conversion
is done, then it will be off. If the conversion failed, they will be off immediately.
