4K HDBaseT 6x6 Matrix Switcher
PTN Electronics Limited 17 www.PTN-electronics.com
Command
Function
Feedback Example
/:MessageOn;
Turn on the feedback command from the
com port.
/:MessageOn;
Demo.
Switch to the ―demo‖ mode, convert input
and output in turn like1B1, 1B
2, …6B5,
6B6, 1B1
… and so on .The switching
interval is 2 seconds.
Demo Mode
AV: 1-> 1
AV: 1-> 2
AV: 1-> 3
AV: 1-> 4
AV: 1-> 5
AV: 1-> 6
AV: 2-> 1
…
Undo.
To cancel the previous operation.
Undo Ok!
Out 1 2 3 4
In 1 1 1 1
Out 5 6
In 1 1
Operation Commands
[x]All.
Transfer signals from the input channel [x]
to all output channels
X To All. (X=1~6)
All#.
Transfer
all
input
signals
to
the
corresponding
output
channels
respectively like 1->1, 2->2
…
All Through.
All$.
Switch off all the output channels.
All Closed.
[x]#.
Transfer signals from the input channel [x]
to the output channel [x].
X Through. (X=1~6)
[x]$.
Switch off the output channel [x].
X Closed. (X=1~6)
[x]@.
Switch on the output channel [x].
X Open. (X=1~6)
All@.
Switch on all output channels.
All Open.
[x1]V[x2].
Transfer the AV signal from the input
channel [x1] to one or several output
channels ([x2], separate output channels
with comma).
AV: X1-> X2
(X1/X2=1~6)
[x1]B[x2].
Transfer the AV and IR signal from input
channel [x1] to one or several output
channels ([x2], separate output channels
with comma).
AV: X1-> X2
(X1/X2=1~6)
Status[x].
Check the I/O connection status of output
[x]
AV: Y-> X
(X=1~6, Y=1~6)
