4K HDBaseT 6x6 Matrix Switcher
PTN Electronics Limited 18 www.PTN-electronics.com
Command
Function
Feedback Example
Status.
Inquire the input channel to the output
channels one by one.
AV: 1-> 1
AV: 2-> 2
AV: 3-> 3
AV: 4-> 4
AV: 5-> 5
AV: 6-> 6
Save[Y].
Save the present operation to the preset
command [Y], ranges from 0 to 9.
Save
To
FY
(Y=0-9)
Recall[Y].
Recall the preset command [Y].
Recall
From
FY
(Y=0-9)
Clear[Y].
Clear the preset command [Y].
Clear
FY
(Y=0-9)
PWON.
Work in normal mode.
PWON
PWOFF.
Enter into standby mode and cut off the
power supply to HDBaseT receivers.
PWOFF
STANDBY.
Enter into standby mode. (Do not cut off
the power supply to HDBaseT receivers,
press other buttons or send other
commands to start.)
STANDBY
Audio/[X]:[Y].
Select HDMI audio or analog audio as
audio source for output 1~6.
Audio/[X]:[Y].
X=1~6, Y=0 (HDMI
audio) or 1 (Analog
audio).
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for input (value: I) or output (value:
O); [X] is the number of the port, if the
value of X is ALL, it means all ports; [Z] is
for HDCP compliant status, the value may
be 1 (HDCP compliant) or 0 (not HDCP
compliant).
/%[Y]/[X]:[Z].
[x1]R[x2].
Transfer the IR signal from output channel
[x1] to input channel [x2].
IR: X1-> X2
(X1/ X2=1~6)
DigitAudioON[
x].
Enable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, enable this port.
X=7, enable all the 6 ports.
DigitAudio ON with [x]
x=1~6 or ALL
DigitAudioOF
F[x].
Disable HDMI audio output of port x.
X=1, 2, 3, 4, 5, 6, disable this port.
X=7, disable all the 6 ports.
DigitAudio OFF with
[x]
x=1~6 or ALL
