4K 2x5 HDBaseT Splitter Kit
PTN Electronics Limited 9 www.PTN-electronics.com
One-to-all mode
Connect one IR Receiver to IR ALL IN port of 4K 2x5 HDBaseT Splitter, and then
connect 4 IR Emitters to IR OUT ports of HDBaseT Receives. The IR signal can be
transmitted from the IR Receiver to all IR Emitters to control the displays connected
with HDBaseT Receivers.
Turn on/off displays via Wallplate Control Keypad
Press the display control button on Wallplate Control Keypad to turn on/off HDMI display
device, and then the corresponding activity LED ON/OFF will turns green.
4.3 EDID Management
The EDID setting for the 4K 2x5 HDBaseT Splitter is defined by the first detected display
(detecting from 1-HDBT~5-HDMI).
For example: when output 1-HDBT connects with a 4K display, 4K 2x5 HDBaseT Splitter
will select 4K as output resolution and distribute 4K video signal to all displays. If a
display does not support the 4K video content, there are will no video output on the
display.
HDBaseT Receiver
HDTV 3
IR Emitter
HDBaseT Receiver
HDTV 4
IR Emitter
HDMI:
IR:
HDBaseT:
STB
4K 2X5 HDBaeT Splitter
Blu-Ray DVD
AUDIO
COAX
5-HDMI
DC 24V
1-HDMI
2-HDMI
INPUTS
OUTPUTS
IR IN
POWER
1-HDBT
2-HDBT
3-HDBT
4-HDBT
1
2
4
IR ALL IN
3
L
R
TO WP
HDBaseT Receiver
IR Emitter
HDTV 1
4K 40m
HDBaseT Receiver
HDTV 2
IR Emitter
4K 40m
4K 40m
4K 40m
HDTV 1 2 3 4 Remote
/ / /
IR Receiver
