10
11
The MEMo Chip
Each package of PTS Panels test strips contains a color-coded, lot-specific MEMo Chip.
The MEMo Chip contains the settings for each test. The bottom has a label with the test
name and lot number. Always make sure you insert the MEMo Chip into the port with
the finger notch facing up.
What does the MEMo Chip do?
The MEMo Chip contains proper settings
for the test strip lot you are using.
The MEMo Chip:
•
Stores the test strip expiration date
•
Tells the analyzer which test(s) to run
•
Contains the calibration curve and the lot number for the specific test strip lot
•
Controls test sequences and timing
•
Provides the measuring range for the test
Guidelines for using the MEMo Chip
•
The MEMo Chip must be inserted to run a test.
•
Use only the MEMo Chip that is included with each package of test strips. The lot
number code on the test strip vial, MEMo Chip, and analyzer display must match.
•
If the expiration date in the MEMo Chip has passed, the analyzer will display
EXPIRED LOT.
•
If your MEMo Chip is lost or misplaced, please call PTS Diagnostics Customer Service
for a replacement or use another MEMo Chip from another vial of the same lot
number.
Lot#
X000
Cholesterol
The MEMo Chip port is located at the top center of the
analyzer. The MEMo Chip is inserted into this port
with the lot number facing down. Push firmly, but
gently, until the MEMo Chip is fully inserted.
Important:
Be careful not to bend the connector.
PTS Panels Test Strips
PTS Panels test strips are designed for specific analytes. A test strip is inserted into
the analyzer, then blood is applied to the blood application window for reflectance
tests. As previously described, the ensuing chemical reaction produces a color
change, which the analyzer measures and compares to the calibration curve stored
in the lot-specific MEMo Chip. The analyzer converts this color reading measurement
into a test result, displayed on the screen. Each PTS Panels test strip box contains a
package insert that provides instructions for use and information specific for each
test. Please read the instructions completely before testing.
Apply blood to
application window
Examples of reflectance test strips
The CardioChek PA test system has many different analyte test strips
available for use. The test strips outlined in this section are only an
example of the available test strips. Not all test strips are available
for use in all countries. Please refer to the package insert of each
PTS Panels test strip prior to use.
