DIADOS E
T11035
General Information
2
D616.131.00/10 en
General Information
The product bears the CE-mark "CE-0124" in
accordance
with
the
Council
Directive
93/42/EEC about Medical Devices and fulfills
the essential requirements of Annex 1 of this
directive. The product is a class IIb device
(MDD).
The product was granted the type approval as
diagnostic dosemeter DIADOS E in accord-
ance with § 13 of the German Verification Act
(Eichgesetz) by the German National Metrolo-
gy Institute (Physikalisch-Technische Bun-
desanstalt, PTB) in Braunschweig. For de-
tailed information, refer to section "Technical
Specifications".
Product standard
The product fully complies with the require-
ments of the following standard IEC 61674.
Electrical safety
The product fully complies with the require-
ments of the following standard IEC 61010-1.
Electromagnetic immunity
The product fully complies with the require-
ments of the following standards:
IEC 61326-1 / IEC 61674.
The user manual is an integral part of the
product. It should always be kept near the
product. Observance of the manual is a pre-
requisite for proper product performance and
correct operation.
Operator safety, specified measuring accuracy
and interference-free operation can be guaran-
teed only if original products and parts are
used. Furthermore only the accessories listed
in this manual are approved by PTW-Freiburg
and may be used in conjunction with the prod-
uct, or else accessories whose use has been
expressly permitted by PTW-Freiburg. Safe
operation and proper product performance are
not guaranteed if accessories or consumables
from other manufacturers are used.
PTW-Freiburg cannot be held liable for dam-
ages resulting from the use of accessories,
consumables from other manufacturers or
when the user ignores the instructions and in-
formation given in this manual.
The warranty period is 1 (one) year and begins
on the day of delivery. It is unaffected by re-
pairs covered by the warranty regulations.
PTW-Freiburg considers itself responsible for
safety, reliability and performance of the prod-
uct only, if assembly, extension, readjustment,
modification or repair is carried out by PTW-
Freiburg or by persons authorized by PTW-
Freiburg, and if the product is used in compli-
ance with the technical documentation.
In case of any questions concerning service,
support or warranty please contact your sup-
plier.
