DIADOS E
T11035
Operating Manual
– Putting the System into Operation
22
D616.131.00/10 en
2.5 Basic Settings (Setup Menu)
The unit, timer, contrast and auto power-off time are
selected in the Setup menu. In addition, the respec-
tive calibration data can be viewed in the Setup
menu.
The keys RESET + APPL. take you to the Setup
menu (press RESET first and, holding it depressed,
push APPL.).
With
and
(APPL. and MODE keys) you navigate
within the Setup menu, with
(RESET key) you
access the sub-menu to make selections. To exit
menus without saving the changes, press ESC
(
ALT
key).
Figure 7:
Setup menu 1/2
Figure 8:
Setup menu 2/2
Unit
You can choose among the units Gy, R and C. As
soon as the DIADOS E is officially calibrated, the
unit “R” can not be selected.
Timer
For measurements in normal mode, the timer can
be set to OFF, 20 s or 2 s. The timer function is
inactive in pulsed mode.
Calibration Data Menu
In this menu you can view the calibration data for
the applications.
Figure 9:
Calibration data menu 1/4
Figure 10:
Calibration data menu 2/4
Figure 11:
Calibration data menu 3/4
Figure 12:
Calibration data menu 3/4
The first overview lists the application, the calibra-
tion date and the label
“s” or “u”.
The label “s” means secured and designates a offi-
cially calibrated application. The label “u” means
unsecured and designates an not officially calibrat-
ed application.
Use
or
to choose the application and press
to
display the rest of the data.
