NOMEX
Safety Information
D909.131.00/02 en
15
Safety Information Concerning the Software
WARNING
Hazards originating from other system compo-
nents.
Incorrect Operation!
Observe the safety information provided in the
user manuals of the system components
WARNING
Use of the NOMEX software by persons with
inadequate qualifications.
Incorrect Operation!
The use of the NOMEX software is limited
to persons who are familiar with the software
and who are adequately trained or experienced
in the use of such programs and who own
the necessary decision-making competence to
ensure proper use. This includes the following
activities:
– determination of the measuring and analy-
sis parameters
– determination of the tolerance levels
– selection of correction protocols according
to different standards
– selection or generation of the correction
tables according to different standards
– evaluation and plausibility check of measur-
ing and analysis data provided by the soft-
ware
– introduction of the software in the depart-
ment
– as well as the instruction provided to the
personnel on how to perform measure-
ments.
CAUTION
Influences by other software.
Malfunction!
If software programs other than the
NOMEX software or programs approved
by PTW-Freiburg are installed on the PC,
PTW-Freiburg cannot be held liable for com-
puter malfunctions resulting from this fact. Fur-
thermore, PTW-Freiburg cannot guarantee the
proper functioning if third-party software pro-
grams were previously installed on the PC and
were not entirely removed.
For the proper functioning of the NOMEX soft-
ware, ensure that only
one
version of this soft-
ware is installed on the PC.
CAUTION
Use in combination with unsuitable system
components.
Incorrect Operation!
Only install the NOMEX software on PCs
that meet the requirements of the standard
UL 60950-1 or IEC 60950-1.
Do not operate the PC in the patient environ-
ment.
