NOMEX
Operating Manual - NOMEX Multimeter Setup
48
D909.131.00/02 en
The measurable tube voltage (kV) depends on
the total filtration and vice versa. For measurable
combinations of tube voltage and total filtration,
refer to
. The gray area is the range that
is defined by PTW for measuring the tube voltage,
dose, and half value layer. It is also possible to
perform measurements in the hatched areas. In
this case, however, the measurement results may
be less accurate.
Figure 17: Measurable combinations of kV and TF for measuring the tube voltage, dose, and half value
layer in sensitivity mode "Normal" or for measuring the dose in sensitivity mode "Heavily Fil-
tered"
