NOMEX
Operating Manual - NOMEX Software Options
D909.131.00/02 en
67
10 NOMEX Software Options
Select the
Options
menu to display the
Options
dialog.
The
Options
dialog comprises four tabs for the fol-
lowing topics:
–
Displayed values
:
selection of the values to be displayed in the
measuring window for the currently selected
application
–
Demo mode:
selection of the simulation mode
–
Graphic
:
options for the storage of the waveforms
–
Table
:
options for the measuring table
With the
Reset
button you restore the default set-
tings of the currently displayed tab.
10.1 Selecting the Displayed
Values
Figure 23: Options dialog - Displayed values tab
On the
Displayed values
tab, you can select the
values to be displayed on the measuring window.
The choices depend on the selected application.
The window on the left shows the currently dis-
played values, the window on the right shows the
values not currently displayed.
Use the buttons between the two windows to
move the values and to determine their order.
Click to move the value selected in the
right window to the left window.
Click to move the value selected in the
left window to the right window.
Click to move the selected value up.
Click to move the selected value down.
