Page
33
of
40
Rev 1.7 10/20
Port Settings:
The Port Settings section allows you to adjust the network ports of the camera.
HTTP Port:
This port is used for HTTP-CGI control, and for the web application. Default: 80.
RTSP Port:
This port is used for the RTSP streaming protocol. Default 554.
PTZ Port:
This port is used for the TCP/IP control protocol. Default: 5678.
UDP Port:
This port is used for the UDP control protocol. Default: 1259
Control Protocol Settings:
The Control Protocol Settings section allows you to adjust the Pelco-D & Pelco-P control address.
Pelco-D Address:
0 ~ 254
Pelco-P Address:
0 ~ 31
RTMP Settings:
The RTMP(S) Settings section allows you to enable or disable the two (2) RTMPS stream’s video and
audio sources.
First Stream:
Enable / Disable Stream 1 Video & Audio
(First Stream) MRL:
Text field for RTMPS Stream 1’s Media Resource Locator (MRL)
Second Stream:
Enable / Disable Stream 2 Video & Audio
(Second Stream) MRL:
Text field for RTMPS Stream 2’s Media Resource Locator (MRL)
Third Stream:
Enable / Disable Stream 3 Video & Audio
(Third Stream) MRL:
Text field for RTMPS Stream 3’s Media Resource Locator (MRL)
RTSP Settings:
The RTSP Settings section allows you to enable or disable RTSP Authorization.
RTSP Auth.:
Enable / Disable RTSP authorization.
ONVIF Settings:
The ONVIF Settings section allows you to adjust the ONVIF settings of the camera.
ONVIF:
Enable / Disable ONVIF protocol control.
ONVIF Auth.:
Enable / Disable ONVIF authorization.
Multicast Settings:
The Multicast Settings section allows you to adjust the Multicast settings of the camera.
Multicast:
Enable / Disable the Multicast protocol.
Address:
Adjust the Multicast address.
Port:
This port is used for the Multicast protocol. Default: 6688.
NTP Settings:
The NTP Settings section allows you to enable / disable the Network Time Protocol of the camera.
Time Zone:
Adjust the time zone you wish to use with NTP.
NTP Time Sync:
Enable / Disable NTP Time Sync
Server Address:
Text field for NTP server.
Time Interval:
Adjust the Time Interval in minutes. Default: 1440
Main Time Show:
Enable / Disable Main Time
Position:
Main Time position
Sub Time Show:
Enable / Disable Sub Time
Position:
Sub Time position
Apply & Cancel Buttons:
Apply or cancel the changes made to the Network Settings section.
Information
The Information section displays the device information, firmware version, & device friendly name. You can adjust the
device friendly name as needed to designate the camera.
