When the camera is working, you can use remote
controller to perform panning, tilting, zooming and
focusing, store and call back preset positions.
Button Instruction
：
1. In this instruction, ‘press the button’ means the
press and relax the two actions. Such as ‘press
[HOME] button’ means to press the [HOME] key and
then relax action, and a special note will be given if a hold
down for more than one second is required.
2. When a button-combination is required, do it in
sequence. For example, ‘[*] + [#] + [F1]’means press [*]
first and then press [#] and press [F1] at last.
1. Pan/Tilt Control
Move up:
Press [ ]
Move down:
Press [ ]
Move left:
Press [ ]
Move right:
Press [ ]
Face the camera back to front: Press [HOME]
Press and hold the up/down/left/right button, the
camera will keep rotating from slow to fast, until it run to
the mechanical limit; the camera stops as soon as the
button is released.
2. Zoom
Zoom Out:
press [ZOOM ] button
Zoom In:
press [ZOOM ] button
Press and hold the button, the camera will keep
zooming in or zooming out and it stops as soon as the
button is released.
Summary of Contents for 12X-SDI
