36
Rev 2.0 6/21
NDI
®
Config
NDI
®
Local Device Name:
The friendly name the camera will
show up as within NDI
®
devices.
For best results, give all ‘live’ cameras the same Local Device
Name. e.g., ‘PTZ Cameras’ or “Box Cameras”.
NDI
®
Local Device Channel:
The channel name the camera
will utilize within NDI
®
devices.
For best results, set a unique Local Device Channel for each
camera. e.g., ‘Wide Shot’ or ‘Tight Shot’.
NDI
®
Receive Group:
The NDI
®
Receive Group allows you to
limit which users on your LAN can see the NDI
®
source.
For best results, the Receive Group should remain “Public”.
Once the Receive Group is changed, you will need to join the
Receive Group through NDI
®
Access Manager.
Enable NDI
®
Discovery Server:
Enable / Disable the NDI
®
Discovery server.
NDI
®
Discovery Server:
Server address field when NDI
®
Discovery server is enabled.
Enable NDI
®
Multicast Server:
Enable / Disable the NDI
®
Multicast Server.
NDI
®
Multicast Address:
Multicast address field when NDI
®
Multicast server is enabled.
NDI
®
Multicast Mask:
Used to adjust the NDI
®
Multicast
Subnet Mask.
NDI
®
Multicast TTL:
Used to adjust the Multicast Time-To-Live interval.
NDI
®
Firmware Version:
Displays the current NDI
®
version on the camera.
For more information on how to utilize the NDI Discover server, check out
https://support.newtek.com/hc/en-
us/articles/218109477-NDI-Discovery-and-Registration
NewTek
®
, NDI
®
, NDI
®
4, & NDI
®
|HX are all registered trademarks by Vizrt Group
®
.
Information
The Information section displays the device information, firmware version, & device friendly name. You can adjust the
device friendly name as needed to designate the camera.
Language
The Language selection dropdown allows you to change the language of the Web Interface.
Select either “English”, “Chinese” (
中文
), or “Russian” (Русский).
Summary of Contents for PT12X-NDI-GY-G2
Page 11: ...10 Rev 2 0 6 21 Dimensional Drawings mm ...
Page 35: ...34 Rev 2 0 6 21 Network ...