Revision 2
10
Problem solving
The S1300H is designed and manufactured for severe environments and tasks, but the user must note
that the machine must be protected from knocks and blows. Filter, seals, attachments, and connections
are carefully adapted and selected with regard to the operator’s work environment. Therefore, the
operator and service personnel must treat the machine with care in order to work correctly for many
years.
Problem
Cause
Procedure
Motor does not start
No power
Connect
the
machine
Cable defective
Change
Switch defective
Change
Motor stops immediately
Wrong fuse
Connect to correct fuse
after starting
Motor runs but there is no
Hose not connected
Connect hose
suction
Hose blocked
Clean hose
No plastic bag
Fit plastic bag
Motor runs but suction
Hole in the hose
Change hose
Poor
Filter blocked
Change filter
Top cover loose
Adjust
Sealing defective
Change current seal
Dust blows from motor
Filter loose or defective
Adjust or change
Abnormal noise
Order service
KEEP THESE INSTRUCTIONS!
