Revision 2
9
Service
When cleaning and servicing the machine, you must switch the machine off and pull out the plug from
the outlet.
Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the openings on the
machine, especially the opening for the cooling air.
Before moving the machine from the working area, the machine must be cleaned.
All other equipment must be considered to be contaminated and be treated thereafter.
If possible, use a special suitable room.
Proper personnel protective equipment must be used.
After a service, all parts that are contaminated must be taken care of properly in plastic bags,
according to all regulations.
If the vacuum cleaner has to be used for other purposes, it is extremely important that the vacuum
cleaner is cleaned to avoid the spread of hazardous dust.
Accessories
Part.no.
Description
No./machine
200600596
Complete filter set
1 pcs T8600F
200600595
MF5500 HEPA filter
2 pcs T8600F
1337032
Cleaning set
1 pcs
1376013
Longopac (4-pack).
1 pcs
For other spare parts, see the enclosed spare parts list.
Warranty
All Pullman-Ermator devices and accessories have a 12-month factory warranty for material and
manufacturing defects. The warranty extends to 36 months when returning the attached warranty slip.
Do not attempt to repair the suction apparatus without the consent of the manufacturer.
The warranty does not cover defects which are the result of normal wear and tear, negligence,
defective use, unauthorised repair or the suction apparatus being connected to the incorrect voltage.
In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or
our authorised representative for warranty examination and for any warranty repair or replacement.
