EN
Fig. 8 Time setting interface
Fig. 9 System menu interface
Short press the button to select the option to be adjusted, then long press the button to change the
value. The device adopts 24-hour clock.
“set time”: set the time, “yes”: to set the time, “no”: not set the time
“set year”: set the year
“set month”: set the month
“set day”: set the day
“set hour”: set the hour
“set minute”: set the minute
After setting, short press the button to select “Exit”, then long press the button to exit clock setting
interface. If user changes the setting, current set time will be displayed, then press the button to return
to the main menu; if the time is not set, it directly return to the main menu.
6.3.4 System setting and other options introduction
Under main menu, short press the button to select “System”, then long press the button to enter the
interface as shown in Figure 9.
Short press the button to select the option to be adjusted, then long press the button to change the
value.
“Hard.Ver.”: hardware version
“Soft.Ver.”: software version
“ID”: user name
“Demo”: set the Demo mode, “on”: turn on the Demo mode, “off”: turn off the Demo mode.
“Sound Volume”: set the sound volume, adjustable range: 1 ~ 3
“Brightness”: set the screen brightness, adjustable range: 1 ~ 4
After setting, short press the button to select “Exit”, then long press the button to exit the system menu
and return to main menu.
6.3.5 Shutdown
Under the main menu interface, short press the button to select “Power off”, then long
press the button to turn off the device.
6.3.6 Exit main menu
Under main menu, short press the button to select “Exit”, then long press the button to exit the main
menu and return to the measurement interface.
6.4 Data upload
Connect the device to computer by the USB cable, upload the data after connecting with the PC
software properly, refer to “Software operating instruction” for details.
Note: the PC software can be downloaded from our official website.
6.5 Charging
Power adapter can be selected to charge for the device.
It indicates that the device is charging when the indicator is orange, the charging is finished when the
indicator turns to green.
6.6 Reset
Use a pointed and hard object (for example, a paper clip) to press the reset button inside of the RESET
hole, to reset the device.
7. Maintain, Transportation and Storage
7.1 Cleaning and Disinfecting
The device must be turned off before cleaning, and it should not be immersed into liquid. Use 75%
alcohol to wipe the device enclosure, and use liquid soap or isopropanol to wipe the watchband for
disinfection, nature dry or clean it with clean and soft cloth. Do not spray any liquid on the device
directly, and avoid liquid penetrating into the device.
7.2 Maintain
A.
Please clean and disinfect the device before using according to the User Manual (7.1).
