1. Press the MENU (3) button briefly to enter the Time
menu item.
2. Select the time format (24-hour clock or AM / PM) by pressing the UP (4) /DOWN (2).
3. Press the MENU (3) button to select the hours.
4. Press the UP (4) / DOWN (2) buttons to select the hour value.
5. Press the MENU (3) button to select the minutes.
6. Press the UP (4) / DOWN (2) buttons to select the minute value.
7. Press and hold the MENU (3) button to save the time and exit the submenu.
Units of Measure
Rangefinder units of measure
1. Press the MENU (3) button briefly to enter the Units of Measure
menu item.
2. Press the UP (4) / DOWN (2) buttons to select either Meters or Yards as the unit of
measure.
3. Press the MENU (3) button briefly to confirm your selection.
4. Exit from the submenu will happen automatically.
Default Settings
Factory reset
1. Press the MENU (3) button briefly to enter the Default Settings
menu item.
2. Use the UP (4) / DOWN (2) buttons to select Yes to restore default settings or No to
cancel.
3. Confirm your selection with a short press of the MENU (3)
If Yes is selected, display will show"Do you want to restore default settings?" and Yes
and Nooptions. Select Yes to restore the default settings.
Selecting the No option will cancel the reset and exit the submenu.
The following settings will be returned to their defaults before being changed by the user:
Video Recorder Mode – Video
Observation Mode – Forest
Calibration Mode – Automatic
Language – English
Mictophone - off
Wi-Fi – Off (default password)
Magnification – Standard (without digital zoom)
PiP – Off
Color Mode – White Hot
Units of Measure – Meters
Attention!When restoring the factory defaults the date, time and user pixel map are saved.
