26
25
FUNCTION
PiP
18
PiP
(“Picture in Picture”) allows you to see
a zoomed image simultaneously with the
main image in a dedicated window.
6.9x
3.1x
Turn on/off the
PiP
function with a long
press of the
DOWN (5)
button.
Change zoom ratio in the
PiP
window with a short press of the
DOWN
button.
The zoomed image is displayed in a dedicated window, with the full
optical magnification being shown.
The main image is shown with optical magnification ratio which
corresponds to ratio x1.0.
When
PiP
is turned on, you can operate the discrete and continuous
digital zoom. The full optical magnification will take place only in the
dedicated window.
When
PiP
is turned off, the image is shown with the optical
magnification set for the
PiP
function.
STREAM
VISION
19
Accolade LRF
thermal imaging binoculars support Stream Vision
technology which allows you to stream an image from the display of
your thermal imager to a smartphone or tablet PC via Wi-Fi in real time
mode. You can find further guidelines on Stream Vision on our web site
www.pulsar-nv.com
Note:
the Stream Vision application allows you to update the firmware
features of your thermal imager.
Scan the QR codes to download Stream Vision free of charge:
Google Play (Android OS): iTunes (iOS):
Connection modes:
Memory card (external memory).
In this mode the device is detected by the computer as a flash card.
This mode is designed for work with the files saved in device's
memory. The device's functions are not available in this mode; the
device turns off automatically.
If video recording was in progress when connection was made,
recording stops and video is saved.
When
USB
is disconnected from the device where connection is in
the
USB
Mass storage device mode, the device remains on the
OFF
state. Turn the device on for further operation.
Power.
In this mode PC/laptop is used as an external power supply. The
status bar shows icon . The device continues operating and all
functions are available.
Note:
The Battery pack installed in the device is not being charged!
When
USB
is disconnected from the device when in the Power mode,
the device keeps operating with Battery Pack, if available, and it has
sufficient charge.
USB CONNECTION
20
Connect one end of the
USB cable
(16)
to the Micro-USB
(15)
port of
your device, and the other end to the USB port of your PC/laptop.
Turn the device on with a short press of the
ON/OFF (1)
button (device
that has been turned off cannot be detected by your computer).
Your device will be detected by the computer automatically; no drivers
need to be installed.
Two connection modes will appear
on the display:
Memory card (external memory)
and
Power
.
Select connection mode with
UP
and
DOWN
buttons.
Confirm selection with a short press of the
M
button.
USB connection
Use as power
Use as memory card
Summary of Contents for Accolade LRF XQ38
Page 1: ...www pulsar nv com ACCOLADE LRF Thermal Imaging Binoculars ...
Page 92: ......
