3
Two protective tubes with a length of 0,5 m. are used for routing of power cords and signal cables from the
installation to the Patch Panel.
Protective tube for power cord
– internal/external diameter ø6/ø10 (available as
accessory
– MM064).
Protective tube for signal cables
– 24 YTDY 6x0.5 wires, internal/external diameter ø21/ø29
(available as accessory
– MM020). The routing of protective tubes in the Patch Panel and its sealing is shown in the Fig. 5.
Fig. 5
The ARAD-S4 enclosure is fitted with 3 tamper switches:
1. Pulling out the enclosure from RACK profiles
2. Enclosure opening
3. Patch Panel opening
The enclosure is mounted in the front of the RACK rails - using 4xM6 screws.
