3
2.
Mounting with the ARAS450 rails - full extension slide of the RACK cabinet, rails of the ARAS450 series are the
load-bearing part of the enclosure. Dedicated for up to 30kg load.
2.1.
Mount cage nuts for M6 screws in the RACK cabinet, as shown in Figure below, and mount the ARAS450 rails.
Make sure that the rail is correctly mounted horizontally and its length between the front and rear RACK profile is
properly adjusted.
2.2.
Mount the ARAD450 enclosure on fully extended ARAS rails using 4xM4 screws (complete with ARAS rails).
Tighten the screws from the inside. The enclosure is mounted in the front of the RACK rails - using 4xM6 screws.
4. Accessories:
Power supplies PS…/PSB…/PSBOC… series
Transformers of the following series TOR/TRP/TRZ
Empty mounting Empty mounting Enclosed power supply Transformers Transformers
plate PS.., PSB.., PSBOC.. series units TOR… series TRP… series TRZ 20/40 series
