www.pulsar.pl
RAC24P
RACK POWER CCTV
2
Cechy zasilacza:
•
power output 8x1A/24V AC for powering
analog cameras (
Σ Ι =
8A max.)
•
8 independent, galvanically separated outputs
protected by PTC 1A polymer fuses
•
supply voltage 230V AC
•
LED optical indication LED: AC, TEMP,
ALARM, AUX1 ÷ AUX8
•
acoustic indication of failure
•
control of voltage presence at the
AUX1 ÷ AUX8 outputs
•
the ALARM technical output of collective failure
– relay type, activated by:
•
230V AC power loss
•
activation of the output fuse in the camera
power supply circuit
•
too high temperature of the PSU (>70°C)
•
protections:
•
SCP short-circuit protection
•
transformer overheat protection OHP
•
overvoltage protection
•
overload protection OLP
•
forced cooling (fan)
•
warranty – 2 year from the production date
Sample application of the RACK power supply unit.
CONTENTS:
1. Technical description.
1.1. General description
1.2. Block diagram
1.3. Description of PSU components and connectors
1.4. Specifications
2. Installation.
2.1. Requirements
2.2. Installation procedure
3. Operating status indication.
3.1. LED indication
3.2. Technical output
3.3. Acoustic indication
4. Operation and use.
4.1. Overload or short circuit of the PSU output
4.2. Maintenance
1. Technical description.
1.1. General description.
The RAC24P power supply unit is designer for supplying up to 8 analog cameras requiring voltage of 24V
AC and the total current capacity of 8A. The PSU has 8 independent, galvanically separated outputs protected by
PTC 1A polymer fuses. The power supply is fitted with the ALARM output of collective failure. In case of failure,
relay contacts are switched automatically (the corresponding led goes on). The power supply is located in an
enclosure adapted for mounting in standard RACK 19” cabinets.
