RUPS1612RT
RACK POWER CCTV
4
LoB
– red LED, indicating too low battery voltage (<11,5V)
LED ALARM
– red LED failure indication
Green LED
AUX1 ÷ AUX16
– voltage indication at the AUX outputs
LED DVR
– Green LED
voltage indication at the DVR outputs
AUX1 ÷ AUX16
– independently protected outputs to cameras
DVR
– independently protected outputs of the recorder
BAT
– battery output
ALARM
– technical output of collective failure – relay
BUZZER, micro switch,
turning ON / OFF of acoustic indication
switch in the top position, indication ON
switch in the down position, indication OFF
F1
÷ F16
, glass fuses in the cameras AUX (+) power supply circuits, F1A
F
DVR
, glass fuses in the recorder DVR (+) power supply circuits, F4A
230V AC INPUT
, power socket 230V AC, power cable 1,5m included
F
MAINS
,
fuse in the supply circuit 230V AC, T 6,3A/250V
Fig. 2. The front power of the power supply unit.
Fig.3. The view of the PSU.
