Using The Herb Atomizer
Remove the cover then and unscrew the cap. Use the vape tool
provided to pack a small amount of finely ground herbs into the
heating chamber, being careful to avoid touching or damaging
the heating element with the vape tool. Replace the cap and
cover, and you’re ready to vape! Note: herb atomizer works best
with finely ground and slightly dried herbs. It may be necessary to
stir herbs occasionally to ensure even heat distribution.
Using The Liquid Atomizer
Remove the mouthpiece, hold the cartridge at a 45
°
angle, and
begin filling with e-liquid, using a needle tip bottle or syringe. DO
NOT pour liquid directly into center chamber. DO NOT fill liquid
above MAX line. Failure to follow these directions may result in
leakage, property damage, or personal injury.
3-Click Locking System
Pulsar™ Triad comes equipped with a locking mechanism that
prevents it from turning on accidentally. To arm or disarm the lock,
push the button three times within two seconds. The battery will blink
when armed/disarmed. Always arm the lock when not in use.
Auto-Shutoff Timer
To avoid waste and overheating, Pulsar™ Triad is equipped with a
15 second auto-shutoff timer. After 15 seconds of use, the battery
will blink times and turn off. Allow to cool for several seconds
between each use.
Technical Specifications
Battery Capacity: 180mAh
Battery Voltage: 3.7-4.2v
Wax Atomizer Resistance: 2.4-2.8W
Herb Atomizer Resistance: 2.4-2.8W
Liquid Atomizer Resistance: 2.4-2.8W
3
4
Summary of Contents for Triad
Page 1: ......
