1) Code of the GM3+ strips can be found printed on the box of
GM3+ strips as shown in the figure. For example, let us code
your monitor to use a packet of strips with Code C13.
2) When your press the POWER Button, the monitor
switches ON and displays initial screen in which all the
segment’s of the display are shown.
3) The code number currently set on your GM3+ monitor is
displayed, identified by the “CODE” indicator on the display.
4) Now, press the NEXT or PREV Button to increase or
decrease the code setting till it displays the desired code for
example, C13 to use a pack of strips with code C13.
5) Press the POWER Button to save the new code
number and go to the test mode.
ê
If no Button is pressed for 5 seconds, the displayed code is not saved and your monitor
automatically exits the code setting mode.
7. Blood Glucose Testing
Gather all your testing supplies before you begin to test. You will need the following
items:
1) GM3+ Blood Glucose Monitor
2) GM3+ Test Strips
3) Comfylets Lancets- Super Fine Lancets to ensure easy flow of
blood with maximum comfort.
4) Safe Care Lancet Device- To help you prick your finger for a
blood sample with ease.
5) Sterile Cotton Swab
ê
Items packed with your Kit is marked on your GM3+ Monitor Carton Box.
A) Obtaining a sample of your Blood for Glucose Testing
1) Wash your hands with soap and water. Wipe dry.
2) If you use an alcohol wipe or medicated spirit to clean the
puncture site, ensure that you let your finger dry completely
before testing.
3) Wait at least for 3 to 4 minutes before testing.
4) Wipe the test area with a sterile dry cotton.
